See, decide, act.
Connect cameras and a robot arm. Give tasks in natural language.
Connect the arm and bind external and wrist cameras.
Follower connection
Read the current pose after connecting.
- Execution state
- Disconnected
- Actual gripper opening
- —
- Gripper power feedback
- —
Joint mapping and offsets
Direction and offsets calibrate joint angles. Changes update the pose and preview.
External camera
OffWrist camera
OffIf video stutters, close the camera you are not using.
AI and tasks
Keep context and send reminders while a task runs.
Model and motion settings
The model needs image understanding and tool calling. Changes apply to the next task. Gripper power 0 uses its default.
Describe a task
Example: inspect both views, move the purple sponge to the center mark, then return to the work pose.
With the external preview active, its current image is attached to the task.
Pose and manual control
Joint targets and gripper
The work pose closes the gripper. Opening references: about 71 mm at 30° and 129 mm at 60° (measured at different depths).
TCP position IK
Enter a target position, preview it, then execute. If IK fails, adjust the joint configuration first.
Actual servo feedback
| ID | Raw angle | Voltage | Current | Power | Status |
|---|